GCS Wholesale Conveyor Suppliers Trough type customized degree steel roller set with frame
GCS Conveyor Sapalai ofo atu le tele o ta'avale e fetaui ma le tele o fa'aoga fe'avea'i - fa'atulagaina i tulaga maualuga o alamanuia.E mafai ona fa'avasegaina mea fa'apipi'i, umi, lautele, ma fa'alava e fetaui ma fa'amatalaga a tagata fa'atau.O matou o se gaosiga o ta'avale slotted, rollers, ma fa'avaa.E mafai e le matou falegaosimea ona faia uma mo kamupani tele meafaitino, fa'afaigofie mo tagata uma ona mamanuina ma fa'atonu fa'avili fa'aaganu'u ma fa'atauga fa'atusa fa'avaa i luga ole laiga.
Equal Troughing Idler, o se ta'avale ta'avale masani, e aofia ai ta'avale tutusa e tolu o lo'o lagolagoina ni ta'avale se tolu i totonu o se fa'avaa e fa'amau i le fausaga o le conveyor.
Talosaga
O lo'o fa'aogaina le ta'avale fa'a'ave'ave mo fusi fa'amomoli e maua ai mea ma fa'aitiitia ma fa'agesegese le a'afiaga o le fusipa'u, e masani lava ona fa'atulagaina mo si'osi'omaga pala e pei o la'au fufulu koale, la'au fa'ato'aga, ma vaila'au vaila'au.O taʻavale aʻafiaga e lelei le faʻafefeteina ma afai e faʻaaogaina i tulaga faʻaleagaina, o lo latou ola tautua e faʻalima taimi nai lo taʻavale masani.
Trough Idler Set
O le faatanoata'avale paieseti o lo'o i ai mea fa'aletino ma kemikolo e maualuga le fa'aogaina o le ofuina, maualalo le fa'afefeteina, ma e le faigofie ona ofuina le pa'u pa'u.E iai fo'i le lelei o le lubrication ma e le faigofie le pepa e oti i tulaga leaga, antistatic, mu retardant, matua tetee, ma corrosion teteʻe.E mafai ona tatalia aʻafiaga faifaipea, ma vibration, faʻainisinia faʻatinoga e sili ona lelei, mama, faʻapipiʻi faigofie, leai se tausiga, maualalo le pisa (3-7 DB), ma le faʻaogaina lelei.O le vevela o le faʻaaogaina e tumau i le -40°C i le -85°C.
O ta'avale paieo lo'o fa'aaogaina lautele i nofoaga muamua e felauaiga ai le pefu ma e maualuga le corrosive o le siosiomaga, e pei o le mining.GCSfa'ameamea fa'ameamea sui e mafai ona faia se upusii saoloto ota'avale mo le fusipa'u, fa'afeiloa'i e fa'afeso'ota'i i matou!
Trough Eccentric Idler - SERIES LS/RS
3 Ta'avale Idlers-offset-102 Diamita
Code Nu. | A | B | 20° | 30° | 35° | 45° | E | F | Tele Angle Fa'avae | Fuafu Tia. | Mass RP | Aofa'i Misa | ||||
C | D | C | D | C | D | C | D | |||||||||
XX-A1-3-A1A2-0350-YY | 134 | 600 | 220 | 429 | 239 | 392 | 248 | 369 | 269 | 338 | 56 | 171 | 50 | 27 | 5.3 | 13.6 |
XX-A1-3-A1A2-0400-YY | 152 | 650 | 226 | 477 | 248 | 443 | 256 | 418 | 281 | 380 | 56 | 171 | 50 | 27 | 5.7 | 14.4 |
XX-A1-3-A1A2-0450-YY | 170 | 700 | 232 | 531 | 257 | 490 | 266 | 468 | 294 | 424 | 56 | 171 | 50 | 27 | 6.1 | 15.3 |
XX-A1-3-A1A2-0500-YY | 187 | 750 | 238 | 577 | 266 | 537 | 275 | 515 | 307 | 462 | 56 | 171 | 50 | 27 | 6.4 | 16.3 |
XX-A1-3-A1A2-0600-YY | 222 | 850 | 251 | 681 | 283 | 632 | 298 | 604 | 331 | 546 | 56 | 171 | 50 | 27 | 7.2 | 18.1 |
XX-A1-3-A1A2-0650-YY | 242 | 900 | 259 | 741 | 295 | 691 | 311 | 657 | 345 | 602 | 56 | 171 | 50 | 27 | 7.7 | 19.1 |
XX-A1-3-B1A2-0750-YY | 276 | 1000 | 271 | 837 | 309 | 781 | 327 | 750 | 369 | 678 | 56 | 171 | 63 | 27 | 8.4 | 21.9 |
XX-A1-3-B1A2-0800-YY | 292 | 1050 | 274 | 883 | 320 | 821 | 339 | 789 | 380 | 718 | 56 | 171 | 63 | 27 | 8.8 | 22.9 |
XX-A1-3-B1A2-0900-YY | 329 | 1150 | 286 | 989 | 338 | 926 | 363 | 884 | 406 | 808 | 56 | 171 | 63 | 27 | 9.6 | 24.9 |
XX-A1-3-C1A2-1000-YY | 356 | 1250 | 297 | 1067 | 349 | 1002 | 373 | 963 | 427 | 874 | 56 | 171 | 75 | 27 | 10.2 | 29.7 |
XX-A1-3-C1A2-1050-YY | 381 | 1300 | 307 | 1137 | 366 | 1066 | 391 | 1025 | 445 | 932 | 56 | 171 | 75 | 27 | 10.7 | 31.1 |
XX-A1-3-C1A2-1200-YY | 434 | 1450 | 323 | 1295 | 389 | 1212 | 419 | 1166 | 482 | 1058 | 56 | 171 | 75 | 27 | 11.9 | 34.3 |
Fa'aaliga: XX-tusi mo le :LS po'o le RS.
YY-Tuuina atu mo le tulimanu:20°,30°,35°,45°
Ole lapo'a fa'avae ua filifilia ole fa'atauga masani.Fua F e le fesuisuia'i i le suiga o le lapo'a o le tulimanu fa'avae.
3 Taavale Idlers-offset-114 Diamita
Code Nu. | A | B | 20° | 30° | 35° | 45° | E | F | Tele Angle Fa'avae | Fuafu Tia. | Mass RP | Aofa'i Misa | ||||
C | D | C | D | C | D | C | D | |||||||||
XX-A1-3-B1A2-0500-YY | 188 | 750 | 244 | 574 | 272 | 531 | 281 | 508 | 312 | 454 | 56 | 178 | 63 | 27 | 7.2 | 17.8 |
XX-A1-3-B1A2-0600-YY | 223 | 850 | 257 | 678 | 289 | 626 | 304 | 597 | 336 | 538 | 56 | 178 | 63 | 27 | 8.1 | 19.8 |
XX-A1-3-B1A2-0650-YY | 243 | 900 | 264 | 738 | 301 | 685 | 317 | 650 | 350 | 594 | 56 | 178 | 63 | 27 | 8.6 | 21.0 |
XX-A1-3-B1A2-0750-YY | 277 | 1000 | 276 | 834 | 315 | 775 | 333 | 743 | 374 | 670 | 56 | 178 | 63 | 27 | 9.4 | 22.9 |
XX-A1-3-B1A2-0800-YY | 293 | 1050 | 280 | 880 | 326 | 815 | 345 | 782 | 385 | 710 | 56 | 178 | 63 | 27 | 9.8 | 23.9 |
XX-A1-3-C1A2-0900-YY | 330 | 1150 | 292 | 986 | 344 | 920 | 369 | 877 | 411 | 800 | 56 | 178 | 75 | 27 | 10.7 | 29.0 |
XX-A1-3-C1A2-1000-YY | 357 | 1250 | 303 | 1064 | 355 | 996 | 379 | 956 | 432 | 866 | 56 | 178 | 75 | 27 | 11.4 | 31.0 |
XX-A1-3-C1A2-1050-YY | 382 | 1300 | 313 | 1134 | 372 | 1060 | 397 | 1018 | 450 | 924 | 56 | 178 | 75 | 27 | 12.0 | 32.4 |
XX-A1-3-C1A2-1200-YY | 435 | 1450 | 329 | 1292 | 395 | 1206 | 425 | 1159 | 487 | 1050 | 56 | 178 | 75 | 27 | 13.3 | 35.7 |
Fa'aaliga:XX-fa'aofi mo: LS po'o le RS.
YY-Tuuga mo le tulimanu: 20°, 30°, 35°,45°
Ole lapopo'a fa'afuafua ole fa'aigoa ole fa'atauga masani. E le fesuisuia'i Fusi F ile suiga ole lapo'a fa'avae fa'avae.
FAATAU | PIPE Dia |
6204/6205 | 60/76/89/108/114/127/133 |
6305/6306/6307/6308/63096310/6311/6312 | 76/89/108/114/127/133/159/165/194/219 |
RS roller o se oloa fa'apitoa fa'atasi ai ma fausaga fa'ato'a tolu e mafai ona puipuia lelei le vai ma le pefu.O lenei faʻataʻitaʻiga e faʻaoga i le conveyor belt systems e mafai ona ave le tele o le voluma ma le saoasaoa maualuga pefu bulks.
Fa'amatalaga o oloa
tiute mamafa amoina paie mining conveyor roller
Uamea Toe Fa'afo'i Fa'amea Ta'avale/Mata Mamafa Tiute Fa'atauina Fa'amau Fa'amea Ta'avale Ta'avale Ta'avale/Mina Fa'ali'i Fa'ameamea Fa'amea Ta'avale Ta'avale
O a matou oloa e faʻaaogaina lautele i le gaosiga o le eletise, taulaga, sima, metallurgy ma faʻapea foʻi ma masini feaveaʻi tiute mama mo pisinisi.
FAAMATALAGA | |
Diamita | φ89, φ102, φ108, φ114, φ127, φ133, φ139, φ152, φ159, φ165, φ194 |
Umi | 145mm-2800mm |
Faila | Q235 (GB), Q345 (GB), faʻapipiʻiina ma le DIN2394 tu |
A'au | A3 ma le 45# sila(GB) |
Tuuina atu | Nofofua & Lua La'a Lafoa'i Polo Tu'u 2RS & ZZ ma C3 kilia |
Fa'atauga Fale/Nofoa | O lo'o galue malūlū e fetaui lelei ISO M7 Loo lolomi uamea ma mea mata talafeagai DIN 1623-1624 tulaga |
Suau'u Lubrication | Vasega 2 po'o le 3 umi-mau lithium greasae |
Uelo | Fa'ai'u ueloina arc fa'afefiloi kasa fefiloi |
Ata vali | O ata masani, ata vali u'amea vevela, ata vali fa'afefete eletise, ata vali tao |
Tatami ole Fa'apa'u | Umi ole Fa'apa'u | Ituaiga Tausi | |
mm | inisi | mm | |
63.5 | 2 1/2 | 150-3500 | 6204 |
76 | 3 | 150-3500 | 6204 6205 |
89 | 3 1/2 | 150-3500 | 6204 6205 |
102 | 4 | 150-3500 | 6204 6205 6305 |
108 | 4 1/4 | 150-3500 | 6204 6205 6305 6306 |
114 | 4 1/2 | 150-3500 | 6204 6205 6305 6306 |
127 | 5 | 150-3500 | 6204 6205 6305 6306 |
133 | 5 1/4 | 150-3500 | 6205 6206 6207 6305 6306 |
140 | 5 1/2 | 150-3500 | 6205 6206 6207 6305 6306 |
152 | 6 | 150-3500 | 6205 6206 6207 6305 6306 6307 6308 |
159 | 6 1/4 | 150-3500 | 6205 6206 6207 6305 6306 6307 6308 |
165 | 6 1/2 | 150-3500 | 6207 6305 6306 6307 6308 |
177.8 | 7 | 150-3500 | 6207 6306 6307 6308 6309 |
190.5 | 7 1/2 | 150-3500 | 6207 6306 6307 6308 6309 |
194 | 7 5/8 | 150-3500 | 6207 6307 6308 6309 6310 |
219 | 8 5/8 | 150-3500 | 6308 6309 6310 |
E uiga i le roller, e mafai ona tatou faia le kalave conveyor roller, uamea conveyor roller, ave taavale taavale, moli ogatotonu tiute conveyor roller, o-belt tapered sleeve roller, kalave tapered roller, polymer sprocket roller ma isi.
Fa'amatalaga Autu. | |
Fa'ata'ita'iga NO. | NS/RS/LS |
Fa'ai'uga o luga | Ata vali, fa'a'uvalea po'o lou mana'oga |
Umi | 200-2800mm |
Lanu | e pei o Lou Manaoga |
Ulufale mai Bearings | Lyc(Saina Ta'uta'ua)NSK, SKF |
Tulaga | ISO, Cema, DIN |
Fa'ailoga | ISO9001:2015 |
Fa'atonu | Fa'amea Ta'avale |
Idler Diameter | 89,108,133,159,194,219mm |
Lanu | e pei o lau talosaga |
Vaega | Tumama, Faasao Malosi, ma isi. |
Mea Fa'apitoa | Tumau |
Auaunaga Pe a uma ona Fa'atau | E avanoa Inisinia e tautuaina masini i fafo |
Gafatia uta | pei ole Poloaiga |
Fa'amatalaga Fa'amau | Pusa La'au, Fa'apipi'i Pallet, Fa'amau Fa'atonu |
Fa'ailoga Fa'ailoga | GCS, GCS |
Fela'uaiga afifi | Pusa La'au |
Fa'amatalaga | Tagata fa'atau' Manaoga |
Amataga | Guangdong, Saina (Mainland) |
HS Code | 8431390000 |
Roller Idler Application
GCS Conveyor Roller oloa e faʻaaogaina lautele i le gaosiga o le eletise, uafu, sima laau, metallurgy ma faʻapea foʻi ma masini feaveaʻi tiute mama mo pisinisi.
v uila fe'avea'i
Fa'ali'i La'ina
Vitio
Belt Conveyor Roller Idler
Folasaga conveyor roller i conveyor
O lo'o iai le aia tatau a le GCS e sui ai fua ma fa'amatalaga taua i so'o se taimi e aunoa ma se fa'aaliga.E tatau i tagata fa'atau ona fa'amautinoa latou te mauaina ata fa'amaonia mai le GCS a'o le'i fa'amae'aina fa'amatalaga o le mamanu.
1.O le a le faiga fa'aoga?
Latou te lagolagoina fusipaʻu feʻaveaʻi e ala i le faʻatulagaina i se itu faʻapitoa, faʻaitiʻitia le avanoa mo tupe teu e masaa i luga o le fusipaʻu ma faʻatagaina le fusi e taofi ai nisi tupe teu.
2. O a uiga o le ala?
O le uiga autu o se faatanoa o se itulagi e maualalo le maualuga.