Online Exporter Head Rollers - Conveyor Impact Roller Manufacturers | GCS – GCS

Short Description:

Send email to us

Product Detail

Company Info

HOT SALE

Contact now

Product Tags

Feedback (2)

Being supported by an state-of-the-art and skilled IT team, we could supply technical support on pre-sales & after-sales service for Miniature Conveyor Rollers , Warehouse Conveyor Rollers , Heavy Duty Roller Conveyors , Our customers mainly distributed in the North America, Africa and Eastern Europe. we will source top quality goods using the really aggressive selling price.

Online Exporter Head Rollers - Conveyor Impact Roller Manufacturers | GCS – GCS Detail:

lmpact rollers set

lmpact rollers are used and positioned corresponding to the load points, where the lumps and the weight of material fling onto the belt could in fact cause damage to it.To limit the impact effect of the material onto the rollers, the atter are covered with a series of rubber rings of adequate thickness and resistance.
Impact rollers are under stress not only from the load of the material, but also from the dynamic forces as the loadalls onto the belt. The impact onto the belt, arising from the free fall of material will be naturally greater than in the case where the material is deflected onto the belt by an inclined.
For the correct dimension and the choice of impact rollers in relation to the load check the characteristics of the base roller.

Material Iron
Application Chemical Industry| Grain Transportation|Mining Transport|Power
Plant|Structure Ordinary Roller|Bearing Type|Double Sealed Bearing
Type:Impact Idler
Product Name:Impact Idler Roller
Usage:Conveyor Belt System
Diameter:50-219 mm
Surface Preparation:Spray Paint
Color:Requirements
Certification:ISO 9001 : 2015
Trademark: GCS
HS Code:8431390000

Trough Idler -SERIES RS/HRS

Trough Idler 14

3 ROLL TROUGH IDLERS-152 DIAMETER

Code No.	A	B	20°		30°		35°		45°		Base Angle Size	Shaft Dia.	Trough Mass	Total	Shaft Dia.	Impact Mass R.P.	Total Mass
Code No.	A	B	C	D	C	D	C	D	C	D	Base Angle Size	Shaft Dia.	R.P.	Mass	Shaft Dia.	Impact Mass R.P.	Total Mass
XX-A1-3-C2A2-0750-YY	283	1000	106	856	144	818	164	782	194	694	75	27	17.6	35.2	38	23.7	46.2
XX-A1-3-C2A2-0800-YY	299	1050	106	892	159	860	179	818	206	736	75	27	18.1	36.4	38	24.8	48.5
XX-A1-3-C2A2-0900-YY	336	1150	117	1016	175	962	196	922	235	818	75	27	19.2	38.8	38	24.7	53.1
XX-A1-3-C2A2-1000-YY	363	1250	127	1092	188	1038	215	988	256	882	75	27	20.3	41.2	38	27.2	57.7
XX-A1-3-C2A2-1050-YY	388	1300	142	1162	204	1104	226	1058	270	946	75	27	21.4	43.1	38	28.5	60.4
XX-A1-3-C2A2-1200-YY	441	1450	157	1314	224	1252	260	1192	311	1068	75	27	23.8	47.5	38	32.4	67.6
XX-A1-3-D2A3-1350-YY	493	1650	177	1462	255	1392	283	1338	346	1196	90	30	26.0	55.0	38	35.2	76.6
XX-A1-3-D2A3-1400-YY	499	1700	177	1484	255	1414	295	1342	346	1224	90	30	26.3	56.6	38	35.7	77.7
XX-A1-3-E2A3-1500-YY	546	1800	192	1618	287	1530	316	1474	389	1312	100	30	28.4	67.1	38	39.1	91.9
XX-A1-3-E2A5-1600-YY	566	2000	192	1680	287	1592	334	1518	389	1390	100	33	29.2	72.5	38	39.9	95.9

Note: XX-input for: RS or HRS.
YY-Input for angle: 20°, 30°, 35°,45°
Base angle size nominated is normal stock standard. Dimensions E and F vary with change in base angle size as tabulated below.
Code numbers shown are for plain trough idlers, for impact idlers change both” A’s” in code numbers to ” B’s

SERIES RS/HRS 3 ROLL TROUGH IDLERS-152 DIAMETER

Code No.	A	B	20°		30°		35°		45°		Base Angle Size	Shaft Dia.	Trough Mass R.P.	Total Mass	Shaft Dia.	Impact Mass R.P.	Total Mass
Code No.	A	B	C	D	C	D	C	D	C	D	Base Angle Size	Shaft Dia.	Trough Mass R.P.	Total Mass	Shaft Dia.	Impact Mass R.P.	Total Mass
XX-A1-3-C2A2-1000-YY	363	1250	127	1092	188	1038	215	988	256	882	75	27	21.1	42.2	38	27.2	57.9
XX-A1-3-C2A2-1050-YY	388	1300	142	1162	204	1104	226	1058	270	946	75	27	22.2	44.1	38	28.5	60.6
XX-A1-3-D2A2-1200-YY	441	1450	157	1314	224	1252	260	1192	311	1068	90	27	24.5	50.5	38	32.4	70.4
XX-A1-3-D2A3-1350-YY	493	1650	177	1462	255	1392	283	1338	346	1196	90	30	26.8	56.6	38	35.2	76.8
XX-A1-3-D2A3-1400-YY	499	1700	177	1484	255	1414	295	1342	346	1224	90	30	27.0	57.6	38	35.7	78.0
XX-A1-3-E2A3-1500-YY	546	1800	192	1618	287	1530	316	1474	389	1312	100	30	29.1	68.1	38	39.1	92.2
XX-A1-3-F2A5-1600-YY	566	2000	192	1680	287	1592	334	1518	389	1390	125	33	30.0	80.5	38	39.9	105.7
XX-A1-3-F2A5-1800-YY	630	2200	222	1856	323	1760	369	1688	436	1544	125	33	32.8	88.0	38	44.8	117.1

Note: XX-inputfor: RS or HRS.
YY-Input for angle： 20°, 30°,35°,45°
Base angle size nominated is normal stock standard. Dimensions E and F do not vary with change in base angle size as tabulated below.
Code numbers shown are for plain trough idlers, for impact idlers change both” A’sn in code numbers to ” B*s

Base Angle	E	F
75X75X6	165	235
90X90X7	180	245
100X100X8	200	255
125X125X8	240	273
140X140X12	280	292

Related product

Rubber Disc Return Idler

Pipe Diameter Specifications 114 mm V Return Idler

Roller For DIA(mm) 102|114|117 Flat Return Idlers

GCS conveyor roller manufacturers reserves the right to change dimensions and critical data at any time without any notice. Customers must ensure that they receive certified drawings from GCS prior to finalizing design details.

Tell Us Your Requirement About Trough Idler .Contact us Now!

Product detail pictures:

Related Product Guide:

We now have our individual sales group, layout team, technical team, QC crew and package group. Now we have strict high-quality control procedures for each procedure. Also, all of our workers are experienced in printing discipline for Online Exporter Head Rollers - Conveyor Impact Roller Manufacturers | GCS – GCS , The product will supply to all over the world, such as: Italy, Hyderabad, Provence, we rely on own advantages to build a mutual-benefit commerce mechanism with our cooperative partners. As a result, we have gained a global sales network reaching the Middle East, Turkey, Malaysia and Vietnamese.