Low MOQ for Belt Roller - Trough type 45|35 degree steel roller and roller frame | GCS – GCS
Low MOQ for Belt Roller - Trough type 45|35 degree steel roller and roller frame | GCS – GCS Detail:
Trough Idler Set
The trough idler set has physical and chemical properties which are high wear resistance, low friction coefficient, not easy to wear the leather strap. It also has fine self-lubrication and is not easy to card to die in bad conditions, antistatic, flame retardant, aging resistance, corrosion resistance. It can withstand repeated impact, vibration, mechanical performance is excellent, light weight, easy installation, no maintenance, low noise(3-7 DB), smooth operation. The temperature of using keep in -40°C to -85°C.
The idler rollers is widely used in the original dock transporting places where dust is bigger and the environment has high corrosive, such as mining
Trough Eccentric Idler – SERIES LS/RS
3 Roll Trough Idlers-offset-102 Diameter
Code No. | A | B | 20° | 30° | 35° | 45° | E | F | Base Angle Size | Shaft Dia. | Mass R.P. | Total Mass | ||||
C | D | C | D | C | D | C | D | |||||||||
XX-A1-3-A1A2-0350-YY | 134 | 600 | 220 | 429 | 239 | 392 | 248 | 369 | 269 | 338 | 56 | 171 | 50 | 27 | 5.3 | 13.6 |
XX-A1-3-A1A2-0400-YY | 152 | 650 | 226 | 477 | 248 | 443 | 256 | 418 | 281 | 380 | 56 | 171 | 50 | 27 | 5.7 | 14.4 |
XX-A1-3-A1A2-0450-YY | 170 | 700 | 232 | 531 | 257 | 490 | 266 | 468 | 294 | 424 | 56 | 171 | 50 | 27 | 6.1 | 15.3 |
XX-A1-3-A1A2-0500-YY | 187 | 750 | 238 | 577 | 266 | 537 | 275 | 515 | 307 | 462 | 56 | 171 | 50 | 27 | 6.4 | 16.3 |
XX-A1-3-A1A2-0600-YY | 222 | 850 | 251 | 681 | 283 | 632 | 298 | 604 | 331 | 546 | 56 | 171 | 50 | 27 | 7.2 | 18.1 |
XX-A1-3-A1A2-0650-YY | 242 | 900 | 259 | 741 | 295 | 691 | 311 | 657 | 345 | 602 | 56 | 171 | 50 | 27 | 7.7 | 19.1 |
XX-A1-3-B1A2-0750-YY | 276 | 1000 | 271 | 837 | 309 | 781 | 327 | 750 | 369 | 678 | 56 | 171 | 63 | 27 | 8.4 | 21.9 |
XX-A1-3-B1A2-0800-YY | 292 | 1050 | 274 | 883 | 320 | 821 | 339 | 789 | 380 | 718 | 56 | 171 | 63 | 27 | 8.8 | 22.9 |
XX-A1-3-B1A2-0900-YY | 329 | 1150 | 286 | 989 | 338 | 926 | 363 | 884 | 406 | 808 | 56 | 171 | 63 | 27 | 9.6 | 24.9 |
XX-A1-3-C1A2-1000-YY | 356 | 1250 | 297 | 1067 | 349 | 1002 | 373 | 963 | 427 | 874 | 56 | 171 | 75 | 27 | 10.2 | 29.7 |
XX-A1-3-C1A2-1050-YY | 381 | 1300 | 307 | 1137 | 366 | 1066 | 391 | 1025 | 445 | 932 | 56 | 171 | 75 | 27 | 10.7 | 31.1 |
XX-A1-3-C1A2-1200-YY | 434 | 1450 | 323 | 1295 | 389 | 1212 | 419 | 1166 | 482 | 1058 | 56 | 171 | 75 | 27 | 11.9 | 34.3 |
Note: XX-input for :LS or RS.
YY-Input for angle:20°,30°,35°,45°
Base angle size nominated is normal stock standard. Dimensions F does not vary with change in base angle size.
3 Roll Trough Idlers-offset-114 Diameter
Code No. | A | B | 20° | 30° | 35° | 45° | E | F | Base Angle Size | Shaft Dia. | Mass R.P. | Total Mass | ||||
C | D | C | D | C | D | C | D | |||||||||
XX-A1-3-B1A2-0500-YY | 188 | 750 | 244 | 574 | 272 | 531 | 281 | 508 | 312 | 454 | 56 | 178 | 63 | 27 | 7.2 | 17.8 |
XX-A1-3-B1A2-0600-YY | 223 | 850 | 257 | 678 | 289 | 626 | 304 | 597 | 336 | 538 | 56 | 178 | 63 | 27 | 8.1 | 19.8 |
XX-A1-3-B1A2-0650-YY | 243 | 900 | 264 | 738 | 301 | 685 | 317 | 650 | 350 | 594 | 56 | 178 | 63 | 27 | 8.6 | 21.0 |
XX-A1-3-B1A2-0750-YY | 277 | 1000 | 276 | 834 | 315 | 775 | 333 | 743 | 374 | 670 | 56 | 178 | 63 | 27 | 9.4 | 22.9 |
XX-A1-3-B1A2-0800-YY | 293 | 1050 | 280 | 880 | 326 | 815 | 345 | 782 | 385 | 710 | 56 | 178 | 63 | 27 | 9.8 | 23.9 |
XX-A1-3-C1A2-0900-YY | 330 | 1150 | 292 | 986 | 344 | 920 | 369 | 877 | 411 | 800 | 56 | 178 | 75 | 27 | 10.7 | 29.0 |
XX-A1-3-C1A2-1000-YY | 357 | 1250 | 303 | 1064 | 355 | 996 | 379 | 956 | 432 | 866 | 56 | 178 | 75 | 27 | 11.4 | 31.0 |
XX-A1-3-C1A2-1050-YY | 382 | 1300 | 313 | 1134 | 372 | 1060 | 397 | 1018 | 450 | 924 | 56 | 178 | 75 | 27 | 12.0 | 32.4 |
XX-A1-3-C1A2-1200-YY | 435 | 1450 | 329 | 1292 | 395 | 1206 | 425 | 1159 | 487 | 1050 | 56 | 178 | 75 | 27 | 13.3 | 35.7 |
Note:XX-inputfor: LS or RS.
YY-Input for angle: 20°, 30° , 35° ,45°
Base angle size nominated is normal stock standard.Dimensions F does not vary with change in base angle size.
文章推荐
GCS conveyor roller chain manufacturers reserves the right to change dimensions and critical data at any time without any notice. Customers must ensure that they receive certified drawings from GCS prior to finalizing design details.
Tell Us Your Requirement About Trough Idler .Contact us Now!
Related product
Rubber Disc Vee Return Idler by GCS Suppliers
Rubber Disc Return Idlers
Product detail pictures:
Related Product Guide:
We now have several exceptional workers customers good at marketing, QC, and working with types of troublesome trouble during the creation system for Low MOQ for Belt Roller - Trough type 45|35 degree steel roller and roller frame | GCS – GCS , The product will supply to all over the world, such as: Czech republic, Korea, Lyon, Our stock have valued 8 million dollar , you can find the competitive parts within short delivery time. Our company is not only your partner in business, but also our company is your assistant in the coming corporation.
By Patricia from Spain - 2017.10.27 12:12
We have been appreciated the Chinese manufacturing, this time also did not let us disappoint,good job!
By Hedda from Morocco - 2017.01.28 18:53