High Quality for Conveyor Drum Rollers - Trough impact roller is applied in the mine | GCS – GCS
High Quality for Conveyor Drum Rollers - Trough impact roller is applied in the mine | GCS – GCS Detail:
Rubber Disc Conveyor Impact Roller Set
Troughing angle 10°,20°,30°,35°,45°
Tube Steel Q 235(GB), Q 345(GB), stainless steel (201,304), rubber, nylon, HDPE, UHMWPE
Roller Diameter 89-194 mm
Bearing Single & Double Row Deep Groove Ball Bearing 2RS & ZZ with C3 clearance, with brand SKF, NSK, HRB…
Bearing Housing/Seat Cold press working fit ISO M7 accuracy
Deep Press steel with raw material fit DIN 1623-1624 standard
Lubricating Oil Grade 2 or 3 long-lasting lithium greasae
Welding Mixed gas shielded arc welding end
Painting Powder coated,Spray paint,Galvanized,Rubber lagging.
Transfer points are critical operational areas for conveyor belts.
Trough Eccentric Idler – SERIES LS/RS
3 ROLL TROUGH IDLERS-OFFSET-114 DIAMETER
Code No. | A | B | 20° | 30° | 35° | 45° | E | F | Base Angle Size | Shaft Dia. | Mass R.P. | Total Mass | Impact | |||||
C | D | C | D | C | D | C | D | R.P. | Mass | |||||||||
XX-A1-3-B1A2-0500-YY | 188 | 750 | 244 | 574 | 272 | 531 | 281 | 508 | 312 | 454 | 56 | 178 | 63 | 27 | 7.2 | 17.8 | 7.5 | 18.1 |
XX-A1-3-B1A2-0600-YY | 223 | 850 | 257 | 678 | 289 | 626 | 304 | 597 | 336 | 538 | 56 | 178 | 63 | 27 | 8.1 | 19.8 | 8.6 | 20.3 |
XX-A1-3-B1A2-0650-YY | 243 | 900 | 264 | 738 | 301 | 685 | 317 | 650 | 350 | 594 | 56 | 178 | 63 | 27 | 8.6 | 21.0 | 9.4 | 21.9 |
XX-A1-3-B1A2-0750-YY | 277 | 1000 | 276 | 834 | 315 | 775 | 333 | 743 | 374 | 670 | 56 | 178 | 63 | 27 | 9.4 | 22.9 | 10.4 | 23.9 |
XX-A1-3-B1A2-0800-YY | 293 | 1050 | 280 | 880 | 326 | 815 | 345 | 782 | 385 | 710 | 56 | 178 | 63 | 27 | 9.8 | 23.9 | 11.1 | 25.2 |
XX-A1-3-C1A2-0900-YY | 330 | 1150 | 292 | 986 | 344 | 920 | 369 | 877 | 411 | 800 | 56 | 178 | 75 | 27 | 10.7 | 29.0 | 12.2 | 30.5 |
XX-A1-3-C1A2-1000-YY | 357 | 1250 | 303 | 1064 | 355 | 996 | 379 | 956 | 432 | 866 | 56 | 178 | 75 | 27 | 11.4 | 31.0 | 13.1 | 32.7 |
XX-A1-3-C1A2-1050-YY | 382 | 1300 | 313 | 1134 | 372 | 1060 | 397 | 1018 | 450 | 924 | 56 | 178 | 75 | 27 | 12.0 | 32.4 | 13.5 | 33.9 |
XX-A1-3-C1A2-1200-YY | 435 | 1450 | 329 | 1292 | 395 | 1206 | 425 | 1159 | 487 | 1050 | 56 | 178 | 75 | 27 | 13.3 | 35.7 | 15.3 | 37.7 |
Note: XX-input for: LS or RS.
YY-Input for angle:20°, 30°, 35°,45°
Base angle size nominated is normal stock standard. Dimensions F does not vary with change in base angle size.
3 ROLL TROUGH IDLERS-OFFSET-127 DIAMETER
Code No. | A | B | 20° | 30° | 35° | 45° | E | F | Base Angle Size | Shaft Dia. | Trough | Impact | ||||||
Mass R.P. | Total Mass | Mass R.P. | Total Mass | |||||||||||||||
C | D | C | D | C | D | C | D | |||||||||||
XX-A1-3-B1A2-0500-YY | 189 | 750 | 250 | 571 | 277 | 525 | 286 | 501 | 317 | 445 | 56 | 184 | 63 | 27 | 8.3 | 18.9 | 8.9 | 21.0 |
XX-A1-3-B1A2-0600-YY | 224 | 850 | 263 | 675 | 294 | 620 | 309 | 590 | 341 | 529 | 56 | 184 | 63 | 27 | 9.3 | 21.1 | 10.5 | 24.1 |
XX-A1-3-B1A2-0650-YY | 244 | 900 | 270 | 735 | 306 | 679 | 322 | 643 | 355 | 585 | 56 | 184 | 63 | 27 | 9.9 | 22.4 | 11.4 | 25.8 |
XX-A1-3-B1A2-0750-YY | 278 | 1000 | 282 | 831 | 320 | 769 | 338 | 738 | 379 | 661 | 56 | 184 | 63 | 27 | 10.9 | 24.4 | 12.9 | 28.6 |
XX-A1-3-B1A2-0800-YY | 294 | 1050 | 286 | 877 | 331 | 809 | 350 | 777 | 390 | 701 | 56 | 184 | 63 | 27 | 11.4 | 25.5 | 13.6 | 30.1 |
XX-A1-3-C1A2-0900-YY | 331 | 1150 | 298 | 983 | 349 | 914 | 374 | 870 | 416 | 791 | 56 | 184 | 75 | 27 | 12.5 | 30.8 | 15.3 | 37.4 |
XX-A1-3-C1A2-1000-YY | 358 | 1250 | 309 | 1061 | 360 | 990 | 384 | 949 | 437 | 857 | 56 | 184 | 75 | 27 | 13.3 | 32.8 | 16.5 | 40.2 |
XX-A1-3-C1A2-1050-YY | 383 | 1300 | 319 | 1131 | 377 | 1054 | 402 | 1011 | 455 | 915 | 56 | 184 | 75 | 27 | 14.0 | 34.4 | 17.6 | 42.4 |
XX-A1-3-C1A2-1200-YY | 436 | 1450 | 335 | 1289 | 400 | 1200 | 430 | 1152 | 492 | 1041 | 56 | 184 | 75 | 27 | 15.5 | 38.0 | 20.0 | 47.6 |
Note: XX-input for: RS or HRS.
YY-Input for angle: 20°, 30° , 35° ,45°
Base angle size nominated is normal stock standard.Dimensions E and F do not vary with change in base angle size.
Code numbers shown are for plain trough idlers,for impact idlers change both” A’s” in code numbers to ” B’s
GCS roller conveyor manufacturers reserves the right to change dimensions and critical data at any time without any notice. Customers must ensure that they receive certified drawings from GCS prior to finalizing design details.
Tell Us Your Requirement About Trough Idler .Contact us Now!
Related product
Rubber Disc Return Idlers
Rubber Disc Vee Return Idler by GCS Suppliers
Conveyor impact idler with rubber for mining equipment
Product detail pictures:


Related Product Guide:
Every single member from our large efficiency profits team values customers' requirements and organization communication for High Quality for Conveyor Drum Rollers - Trough impact roller is applied in the mine | GCS – GCS , The product will supply to all over the world, such as: Argentina, Costa Rica, Irish, We have now 48 provincial agencies in the country. We also have stable cooperation with several international trading companies. They place order with us and export solutions to other countries. We expect to cooperate with you to develop a larger market.

Production management mechanism is completed, quality is guaranteed, high credibility and service let the cooperation is easy, perfect!
