Mai ɗaukar Idler|Firam ɗin nadi|Tsarin jigilar kayayyaki|Pulley|Gravity rollers dababban abu handling conveyor rollers

Kuna buƙatar siya amma ba ku san inda zan fara ba?

Godiya ga babban zaɓi na mu, yana taimakawa wajen amincewa da shawarar ku akan yadda ake amfani da su.Yawancin tsarin kulawa suna buƙatar amfani da suChina conveyor bel nadi, Firam ɗin abin nadi, da rollers a matsayin babban ɓangaren mai ɗaukar kaya, suna sanya raka'o'in sassa daban-daban a cikin tsari na zamani.Anan, rollers suna aiki a ƙarƙashin bel don tallafawa shi kuma suyi aiki (gudu) ƙarƙashin injin lantarki don yin aikin canja wuri lafiya.Babban ayyuka guda biyu sune masu ɗaukar rollers da masu dawowa.Rollers suna da yanayi daban-daban kuma ana iya ƙera su don biyan buƙatun mai ɗaukar kaya.Mafi tsada kuma ana amfani da su a cikin adadi mai yawa shine carbon karfe Q235 rollers;kyakkyawan zaɓi don masu jigilar kayayyaki na asali.Kuma polyethylene (HDPE) rollers za su zama wurin yanayi da halaye na isar da amfani da buƙatun mafi girma don amfani da masu jigilar kaya, a cikin hayaniya da madaidaicin buƙatun manyan ma'adanai, tsire-tsire masu lalata, kamfanonin sinadarai, da sauran masana'antu na musamman. .Tare da maras sanda, mara tsatsa, bayyanar da kai, da mafi kyawun kariya ga sufuri, koda kuwa rollers sun karye kuma ba su yi birgima ba, ba za su lalace ba.Ƙaƙwalwar mai ɗaukar bel ɗin ba ta da yuwuwar sa bel ɗin.Waɗannan su ne wasu daga cikin amfanin da rollers yawanci ke bayarwa.Ana samun daidaitattun daidaitattun ƙa'idodi a cikin GB, CAME, MS, AS da ƙari, don haka karantawa don ƙarin sani game da samfuranmu da abin da za su iya yi muku da kasuwancin ku.Don samfuran gwaji da fatan za a tuntuɓe mu a yau.

Wadanne siffofi ne rollers suke bukata su samu?

Kamar yadda yawancin rollers suna fuskantar turɓaya da gurɓataccen ruwa, kuma kayan suna sawa ko lalata ta jikin nadi, ana haɓaka mafi kyawun rollers don samfuranmu tare da daidaitawar hatimi waɗanda za a iya daidaita su zuwa yanayi daban-daban waɗanda ake amfani da su, don haka. cewa masu amfani za su iya zaɓar samfurin da ya fi dacewa da amfani da su.

Manyan jeri uku na GCS rollers na siyarwa

Samfura: GCS-NS 6204

Samfura: GCS-LS 6204-6205

Samfura: GCS-RS 62-63

Babban fasali (kayayyakin ceton kuzari)

1. Tsarin ƙira mai ƙarfi don aikace-aikacen nauyi mai nauyi.

2, A waldi na karfe tube da kuma hali wurin zama na rollers ne yi da daidai concentric atomatik waldi inji.

3, A sabon da aiki na karfe tube da shaft ake yi da CNC atomatik kayan aiki.

4, Domin cimma mai kyau Fit tsakanin shaft da kuma hali, da shaft karshen ne daidai mirgine-ƙasa.

5, The taro na rollers ne yake aikata ta atomatik kayan aiki da kuma juyawa yi ne 100% gwada.

6, The rollers da goyon bayan sassa za a iya kerarre bisa ga DIN / AFNOR / FEM / ASTM / CEMA matsayin.

7. Ƙarfin waje yana da ƙarfi mai ƙarfi.

8. Ci gaba da lubrication da kiyayewa-free.

9. Rayuwar aiki mafi ƙarancin sa'o'i 30,000, ya fi tsayi dangane da nauyi.

10, Cikakken hatimi: hatimin ciki, hatimin labyrinth mai tsagi 3, zoben roba na V-dimbin yawa na waje, da ɗakin tsabtace kai na centrifugal.

(An gwada ta hanyar gwaje-gwaje na yau da kullun akan ruwa, ruwan gishiri, foda, yashi, tsakuwa, da ƙura)

Raw kayan da ƙayyadaddun bayanai

Shaft: Karfe mai sanyi ST37 DIN17100, E24 AFNOR NFA 35501.

Sanduna: 20.2 25.2 30.2 40.2 ISO duk madaidaicin Ground zuwa 20,25,30,40 daidaici a cikin ɗaki ɗaya da wurin hatimi.

Farashin ISO h6.

Karfe tubes: welded zuwa DIN 2394, abu ST37 zuwa DIN 17100.

Kujerun masu ɗaukar nauyi: sanyi mai hatimi zuwa daidaiton ISO M7, albarkatun ƙasa mai zurfin hatimin ƙarfe zuwa DIN 1623-1624.

Zoben rufewa na ciki: kayan hatimin lebe NYLON6 (ISO Pa6).

Bearings: Zurfafa tsagi ball bearings (clearance class C3) DIN 62 63 jerin.

Labyrinth hatimi: 3 nau'in tsagi, kayan NYLON6 (ISO Pa6).

Murfin: Raw abu mai zurfi-janye karfe zuwa DIN 1623-1624

Zoben rufewa na waje: Zamewar zoben roba mai siffar V a cikin juriya, ƙarancin juriya, robar nitroso mai jure iskar shaka.

Ayyukan murfin kariya: amfani da injiniya don kare rayuwar rollers daga axial oscillation da vibration;wanda aka yi da zinc-magnesium mai jure lalata

aluminum-Copper gami.

Man shafawa: don tabbatar da cewa ana ci gaba da sa mai na abin nadi na tsawon lokaci, yi amfani da man shafawa na 2 da 3 na dogon lokaci na lithium.

Muna da tabbacin cewa za ku sami kyakkyawan zaɓi don kasuwancin ku ko ƙungiyar ku.Idan kuna son tuntuɓar mu a kowane lokaci don magance matsala ko bayar da taimakon tallace-tallace, cibiyar sadarwar mu koyaushe tana nan don taimaka muku.

Daidaitaccen bel/daidaitawar cibiyar abin nadi saitin.

Rollers: Material: Q235 carbon karfe tube, gama tare da fentin surface.