Girman nauyi(nadi) isar da sakokewayon saurin gudu, yadda ake lissafin saurin isarwa, raguwar rabo, da sauransu.

Theabin nadi nadiya ƙunshi nau'i na rollers, waɗanda aka haɗa ta hanyar sarƙoƙi da bel don cimma gindi mara kyau da ci gaba da isar da kayan aikin.

Na'ura mai ɗaukar nauyi wani yanki ne na ci gaba da isar da kayan aiki tare da rollers da yawa da aka shirya tsakanin firam ɗin a ɓangarorin biyu.Ana amfani da shi galibi don jigilar abubuwa masu siffa na yau da kullun ko lebur ƙasa, kamar kwantena akwatin, pallets, da sauransu. Na'urar abin nadi ya ƙunshi firam, abin nadi, na'urar tuƙi, kayan haɗi, da sauransu.

GCS Brand nauyi abin nadi nadi masana'antunsuna da hanyoyin watsawa da yawa.

Babu wuta, lebur bel, zagaye bel, sarka, synchronous bel, Multi wedge bel, da sauran haɗin gwiwa abubuwan.Ana amfani da shi don nau'ikan tsarin jigilar kayayyaki, kuma ana amfani dashi don daidaita saurin haske, matsakaici, da nauyi mai nauyi,

Nadi abu ya galvanized carbon karfe, Chrome-plated carbon karfe, bakin karfe, PVC abu, aluminum abu, cover manne, kunsa manne tsari, bayani dalla-dalla, za a iya tsara bisa ga bukatun, wanda shi ne al'ada inji tsagi conveyor abin nadi.

 

Hanyoyin ƙira na tsari da jagororin abin nadi

Yadda za a zabi gudun abin abin nadi?

An ƙayyade saurin isar da abin nadi nadi bisa ga buƙatun tsarin samarwa da yanayin isarwa.A karkashin yanayi na al'ada, babu mai ɗaukar wutar lantarki da zai iya ɗaukar 0.2-0.4m/s,na'ura mai ba da wutar lantarki0.25-0.5m/s, da kuma ɗaukar ƙimar mafi girma kamar yadda zai yiwu, don haka a ƙarƙashin yanayin da kuma biyan bukatun kayan aiki, rarraba kayayyaki ya fi girma, don inganta damuwa na firam.

Lokacin da saurin isarwa ya iyakance a cikin tsari, yakamata a zaɓi saurin isarwa gwargwadon buƙatun tsari, ammana'ura mai ba da wutar lantarkiKada ya zama fiye da 0.5m/s, mai ɗaukar wutar lantarki bai kamata ya wuce 1.5m/s ba, kuma na'urar abin nadi na sarkar kada ta wuce 0.5m/s.

Hanyar lissafin gudun abin nadi:

1. Canza saurin layiV, diamita na gangaD, gudun gangan3

V=n×d×π n=V/(d×π)

2.i1: Rage rabo tsakanin fitarwa sprocket na reducer da drum sprocket

3. Rage rabon ragewai2

4. Gudun motan

V=n3×d×π

n3= n×i2×i3

V=(n/i2/i3)×π ×d

 

Misalai na magana:

Gudun gudu nawatsa sarkarshine 5m / min, motar tana ɗaukar motar tare da ragewa, ƙimar saurin shine 50, saurin motar shine 1300 r / min, yadda ake zaɓar diamita na abin nadi?

 

Magani:

 

V=(n/i2/i3)×π ×d

V=0.5-5m/min,n=1300r/min,i2=50,i3=1

d=0.06m

 

Diamita na drum shine 60mm