Manual conveyor abin nadi don Nylon conveyor rollers |GCS
Ya dace da lodi har zuwa kilogiram 100, (GCS) Masu ɗaukar nauyi Rollers suna ba da izinin motsi kyauta, ingantaccen kuma jigilar kaya a kowane matakin aiki na layin jigilar kaya.Samar da motsi ta hanyar rundunonin halitta, masu isar da nauyi shine mafita na sarrafa kayan tattalin arziki da ake amfani da su a masana'antu da yawa don sauƙi da aiki.Gilashin da aka ɗora a lokacin bazara ba wai kawai suna ba da kulawa maras wahala ba da sauƙi mai sauƙi suna kuma tabbatar da haɗe-haɗe zuwa firam ɗin jigilar kaya (tashar) yana haɓaka abin nadi da ɗaukar aiki da aiki.Ana samun Rollers a cikin tutiya plated karfe, nailan, da bakin karfe don aikace-aikacen wanke-wanke.Ana ba da shawarar cewa a sami mafi ƙarancin nadi uku a ƙarƙashin kayan don jigilar su a kowane lokaci.Girman abin da ake jigilarwa zai iya taimakawa wajen tantance farar abin nadi akan tsarin isar da ku ta amfani da ƙa'idar abin nadi.(GCSconveyor bel nadi masana'antun) na iya kera na'urorin jigilar nauyi zuwa tsayi, diamita, da buƙatun shaft.
NH nailan rollers
(MODEL) | (D) mm | (T) | Tsawon Abin Mamaki.mm | (d) .mm | TubeMaterial | Ƙarshen Sama |
NH38 | φ38 | T=1.0,1.2,1.5 | 300-1600 | φ12 | Carbon, Bakin Karfe, Karfe, PVC | Zinc plated, Chrome plated |
NH50 | φ50 | T=1.2,1.5 | 300-1600 | φ12 | ||
NH60 | φ60 | T=1.5,2.0 | 300-1600 | φ12,20 | ||
NH75 | φ75 | T=2.0,2.5,3.0 | 300-1600 | φ15 | ||
NH80 | φ80 | T=3.0 | 300-1600 | φ20 |
GCS tana da haƙƙin canza girma da mahimman bayanai a kowane lokaci ba tare da wani sanarwa ba.Abokan ciniki dole ne su tabbatar da cewa sun karɓi ƙwararrun zane daga GCS kafin kammala cikakkun bayanan ƙira.