Mai jigilar kaya Idler

Mai jigilar kaya Idler|Firam ɗin nadi|Tsarin jigilar kayayyaki|Pulley| babban abu Karɓar na'ura mai ɗaukar nauyi

Abin da fasali yi daGCS rollers na siyarwabukatar samun?

Kamar yadda akasarin na'urorin nadi na raɗaɗi suna fallasa ga ƙura da gurɓataccen ruwa, kuma kayan suna sawa ko lalata ta jikin nadi.Ana haɓaka madaidaitan rollers don samfuranmu tare da daidaitawar hatimi waɗanda za a iya daidaita su zuwa yanayi daban-daban waɗanda ake amfani da su, ta yadda masu amfani za su iya zaɓar samfurin da ya fi dacewa da amfani da su.

Raw kayan da ƙayyadaddun bayanai:

Shaft: Cold zana karfe ST37 DIN17100, E24 AFNOR NFA 35501.

Sanduna: 20.2 25.2 30.2 40.2 ISO hll daidai Ground zuwa 20,25,30,40 daidaici a cikin guda hali da hatimi taro yankin Ground to ISO h6.

Karfe tubes: welded zuwa DIN 2394, abu ST37 zuwa DIN 17100.

Kujerun masu ɗaukar nauyi: sanyi mai hatimi zuwa daidaiton ISO M7, albarkatun ƙasa mai zurfin hatimin ƙarfe zuwa DIN 1623-1624.

Zoben rufewa na ciki: kayan hatimin lebe NYLON6 (ISO Pa6).

Bearings: Zurfafa tsagi ball bearings (clearance class C3) DIN 62 63 jerin.

Labyrinth hatimi: 3 nau'in tsagi, kayan NYLON6 (ISO Pa6).Murfin: Raw abu mai zurfi-janye karfe zuwa DIN 1623-1624

Zoben rufewa na waje: Zamewar zoben roba mai siffar V a cikin juriya, ƙarancin juzu'i, oxidation-resistant nitroso-roba.

Ayyukan murfin kariya: amfani da injiniya don kare rayuwar rollers daga axial oscillation da vibration;wanda aka yi da lalata-resistant zinc-magnesium aluminum-Copper gami.

Man shafawa: don tabbatar da cewa ana ci gaba da sa mai na abin nadi na tsawon lokaci, yi amfani da man shafawa na 2 da 3 na dogon lokaci.

Muna da yakinin cewa zaku sami kyakkyawan zaɓi don kasuwancin ku ko ƙungiyar daga masana'antun masu jigilar kayayyaki na GCS.Idan kuna son tuntuɓar masana'antar abin nadi na GCS a kowane lokaci don magance matsala ko ba da taimakon tallace-tallace,GCS masu kera ganguna masu jigilar kayaCibiyar tuntuɓar mu a koyaushe tana nan don taimaka muku.