Fast delivery Roller For Conveyor - Conveyor Impact Roller Manufacturers | GCS – GCS
Fast delivery Roller For Conveyor - Conveyor Impact Roller Manufacturers | GCS – GCS Detail:
lmpact rollers set
lmpact rollers are used and positioned corresponding to the load points, where the lumps and the weight of material fling onto the belt could in fact cause damage to it.To limit the impact effect of the material onto the rollers, the atter are covered with a series of rubber rings of adequate thickness and resistance.
Impact rollers are under stress not only from the load of the material, but also from the dynamic forces as the loadalls onto the belt. The impact onto the belt, arising from the free fall of material will be naturally greater than in the case where the material is deflected onto the belt by an inclined.
For the correct dimension and the choice of impact rollers in relation to the load check the characteristics of the base roller.
Material Iron
Application Chemical Industry| Grain Transportation|Mining Transport|Power
Plant|Structure Ordinary Roller|Bearing Type|Double Sealed Bearing
Type:Impact Idler
Product Name:Impact Idler Roller
Usage:Conveyor Belt System
Diameter:50-219 mm
Surface Preparation:Spray Paint
Color:Requirements
Certification:ISO 9001 : 2015
Trademark: GCS
HS Code:8431390000
Trough Idler -SERIES RS/HRS
3 ROLL TROUGH IDLERS-152 DIAMETER
Code No. | A | B | 20° | 30° | 35° | 45° | Base Angle Size | Shaft Dia. | Trough Mass | Total | Shaft Dia. | Impact Mass R.P. | Total Mass | ||||
C | D | C | D | C | D | C | D | R.P. | Mass | ||||||||
XX-A1-3-C2A2-0750-YY | 283 | 1000 | 106 | 856 | 144 | 818 | 164 | 782 | 194 | 694 | 75 | 27 | 17.6 | 35.2 | 38 | 23.7 | 46.2 |
XX-A1-3-C2A2-0800-YY | 299 | 1050 | 106 | 892 | 159 | 860 | 179 | 818 | 206 | 736 | 75 | 27 | 18.1 | 36.4 | 38 | 24.8 | 48.5 |
XX-A1-3-C2A2-0900-YY | 336 | 1150 | 117 | 1016 | 175 | 962 | 196 | 922 | 235 | 818 | 75 | 27 | 19.2 | 38.8 | 38 | 24.7 | 53.1 |
XX-A1-3-C2A2-1000-YY | 363 | 1250 | 127 | 1092 | 188 | 1038 | 215 | 988 | 256 | 882 | 75 | 27 | 20.3 | 41.2 | 38 | 27.2 | 57.7 |
XX-A1-3-C2A2-1050-YY | 388 | 1300 | 142 | 1162 | 204 | 1104 | 226 | 1058 | 270 | 946 | 75 | 27 | 21.4 | 43.1 | 38 | 28.5 | 60.4 |
XX-A1-3-C2A2-1200-YY | 441 | 1450 | 157 | 1314 | 224 | 1252 | 260 | 1192 | 311 | 1068 | 75 | 27 | 23.8 | 47.5 | 38 | 32.4 | 67.6 |
XX-A1-3-D2A3-1350-YY | 493 | 1650 | 177 | 1462 | 255 | 1392 | 283 | 1338 | 346 | 1196 | 90 | 30 | 26.0 | 55.0 | 38 | 35.2 | 76.6 |
XX-A1-3-D2A3-1400-YY | 499 | 1700 | 177 | 1484 | 255 | 1414 | 295 | 1342 | 346 | 1224 | 90 | 30 | 26.3 | 56.6 | 38 | 35.7 | 77.7 |
XX-A1-3-E2A3-1500-YY | 546 | 1800 | 192 | 1618 | 287 | 1530 | 316 | 1474 | 389 | 1312 | 100 | 30 | 28.4 | 67.1 | 38 | 39.1 | 91.9 |
XX-A1-3-E2A5-1600-YY | 566 | 2000 | 192 | 1680 | 287 | 1592 | 334 | 1518 | 389 | 1390 | 100 | 33 | 29.2 | 72.5 | 38 | 39.9 | 95.9 |
Note: XX-input for: RS or HRS.
YY-Input for angle: 20°, 30°, 35°,45°
Base angle size nominated is normal stock standard. Dimensions E and F vary with change in base angle size as tabulated below.
Code numbers shown are for plain trough idlers, for impact idlers change both” A’s” in code numbers to ” B’s
SERIES RS/HRS 3 ROLL TROUGH IDLERS-152 DIAMETER
Code No. | A | B | 20° | 30° | 35° | 45° | Base Angle Size | Shaft Dia. | Trough Mass R.P. | Total Mass | Shaft Dia. | Impact Mass R.P. | Total Mass | ||||
C | D | C | D | C | D | C | D | ||||||||||
XX-A1-3-C2A2-1000-YY | 363 | 1250 | 127 | 1092 | 188 | 1038 | 215 | 988 | 256 | 882 | 75 | 27 | 21.1 | 42.2 | 38 | 27.2 | 57.9 |
XX-A1-3-C2A2-1050-YY | 388 | 1300 | 142 | 1162 | 204 | 1104 | 226 | 1058 | 270 | 946 | 75 | 27 | 22.2 | 44.1 | 38 | 28.5 | 60.6 |
XX-A1-3-D2A2-1200-YY | 441 | 1450 | 157 | 1314 | 224 | 1252 | 260 | 1192 | 311 | 1068 | 90 | 27 | 24.5 | 50.5 | 38 | 32.4 | 70.4 |
XX-A1-3-D2A3-1350-YY | 493 | 1650 | 177 | 1462 | 255 | 1392 | 283 | 1338 | 346 | 1196 | 90 | 30 | 26.8 | 56.6 | 38 | 35.2 | 76.8 |
XX-A1-3-D2A3-1400-YY | 499 | 1700 | 177 | 1484 | 255 | 1414 | 295 | 1342 | 346 | 1224 | 90 | 30 | 27.0 | 57.6 | 38 | 35.7 | 78.0 |
XX-A1-3-E2A3-1500-YY | 546 | 1800 | 192 | 1618 | 287 | 1530 | 316 | 1474 | 389 | 1312 | 100 | 30 | 29.1 | 68.1 | 38 | 39.1 | 92.2 |
XX-A1-3-F2A5-1600-YY | 566 | 2000 | 192 | 1680 | 287 | 1592 | 334 | 1518 | 389 | 1390 | 125 | 33 | 30.0 | 80.5 | 38 | 39.9 | 105.7 |
XX-A1-3-F2A5-1800-YY | 630 | 2200 | 222 | 1856 | 323 | 1760 | 369 | 1688 | 436 | 1544 | 125 | 33 | 32.8 | 88.0 | 38 | 44.8 | 117.1 |
Note: XX-inputfor: RS or HRS.
YY-Input for angle: 20°, 30°,35°,45°
Base angle size nominated is normal stock standard. Dimensions E and F do not vary with change in base angle size as tabulated below.
Code numbers shown are for plain trough idlers, for impact idlers change both” A’sn in code numbers to ” B*s
Base Angle | E | F |
75X75X6 | 165 | 235 |
90X90X7 | 180 | 245 |
100X100X8 | 200 | 255 |
125X125X8 | 240 | 273 |
140X140X12 | 280 | 292 |
Related product
Rubber Disc Return Idler
Pipe Diameter Specifications 114 mm V Return Idler
Roller For DIA(mm) 102|114|117 Flat Return Idlers
GCS conveyor roller manufacturers reserves the right to change dimensions and critical data at any time without any notice. Customers must ensure that they receive certified drawings from GCS prior to finalizing design details.
Tell Us Your Requirement About Trough Idler .Contact us Now!
Product detail pictures:

Related Product Guide:
Our firm sticks to the basic principle of "Quality is the life of your company, and status will be the soul of it" for Fast delivery Roller For Conveyor - Conveyor Impact Roller Manufacturers | GCS – GCS , The product will supply to all over the world, such as: Turkey, Liberia, Burundi, We are sticking to excellent quality, competitive price and punctual delivery and better service, and sincerely hope to establish long-term good relationships and cooperation with our new and old business partners from all over the world. Sincerely welcome you to join us.

Goods just received, we are very satisfied, a very good supplier, hope to make persistent efforts to do better.
