factory customized Chain Driven Conveyor Rollers - Roller For DIA(mm) 102|114|117 Flat Return Idlers | GCS – GCS
factory customized Chain Driven Conveyor Rollers - Roller For DIA(mm) 102|114|117 Flat Return Idlers | GCS – GCS Detail:
FLAT CARRY|RETURN IDLERS
As part of our (GCS )GLOBAL CONVEYOR SUPPLIES a wide range of idler assemblies to suit most conveyor applications – engineered according to the highest industry standards.
(GCS )GLOBAL CONVEYOR SUPPLIES Flat Return Idler Assemblies are available in 1 or 2 roll configurations, with the 1-roll design being more prevalent. The mass of the return belt is the only load that return idlers are required to support. Idler frame can be customized to suit required belt width. The spacing of these is greater than that of the trough/carry rollers but must be sufficient enough to prevent conveyor belt flap. This distance is usually between 2 and 6 meters.
The return idler are used as support for the return side of belt. Used where materials are not sticky, corrosive, or abrasive.
SPECIFICATION:
For Belt Width: 400-2800 mm
Surface Treatment: Electrostatic Powder Coating, Galvanization.
APPLICATION :Mining|Steel mill|Cement plant|Power plant|Chemical|
Plant|Sea Port|Storage etc.
CERTIFICATE: ISO 9001: 2015,
Flat Return Idler -SERIES LS/RS
FLAT CARRY AND RETURN IDLER-102 DIAMETER
Code No. | A | B | Shaft Dia. | Mass R.P. | Total Mass |
XX-A1-1-K0E2-0350-YY | 442 | 600 | 27 | 3.8 | 8.4 |
XX-A1-1-K0E2-0400-YY | 492 | 650 | 27 | 4.2 | 9.1 |
XX-A1-1-K0E2-0450-YY | 542 | 700 | 27 | 4.6 | 9.7 |
XX-A1-1-K0E2-0500-YY | 592 | 750 | 27 | 4.9 | 10.2 |
XX-A1-1-K0E2-0600-YY | 692 | 850 | 27 | 5.7 | 11.4 |
XX-A1-1-K0E2-0650-YY | 742 | 900 | 27 | 6.1 | 12.0 |
XX-A1-1-K0E2-0750-YY | 842 | 1000 | 27 | 6.8 | 13.2 |
XX-A1-1-K0E2-0800-YY | 892 | 1050 | 27 | 7.2 | 13.9 |
XX-A1-1-K0E2-0900-YY | 992 | 1150 | 27 | 7.9 | 15.0 |
XX-A1-1-K0E2-1000-YY | 1092 | 1250 | 27 | 8.6 | 16.1 |
XX-A1-1-K0E2-1050-YY | 1142 | 1300 | 27 | 9.0 | 16.8 |
XX-A1-1-K0E2-1200-YY | 1292 | 1450 | 27 | 10.1 | 18.5 |
XX-input for: LS or RS.
For flat carry idlers replace E with H.
For alter native return drop heights refer ide ntificati on system.
FLAT CARRY AND RETURN IDLER-114 DIAMETER
Code No. | A | B | Shaft Dia. | Mass R.P. | Total Mass |
XX-A1-1-K0E2-0500-YY | 593 | 750 | 27 | 5.5 | 10.8 |
XX-A1-1-K0E2-0600-YY | 693 | 850 | 27 | 6.3 | 12.0 |
XX-A1-1-K0E2-0650-YY | 743 | 900 | 27 | 6.7 | 12.6 |
XX-A1-1-K0E2-0750-YY | 843 | 1000 | 27 | 7.6 | 14.0 |
XX-A1-1-K0E2-0800-YY | 893 | 1050 | 27 | 8.0 | 14.7 |
XX-A1-1-K0E2-0900-YY | 993 | 1150 | 27 | 8.8 | 15.9 |
XX-A1-1-K0E2-1000-YY | 1093 | 1250 | 27 | 9.6 | 17.1 |
XX-A1-1-K0E2-1050-YY | 1143 | 1300 | 30 | 10.0 | 19.0 |
XX-A1-1-K0E2-1200-YY | 1293 | 1450 | 30 | 11.3 | 21.1 |
XX-input for: LS or RS.
For flat carry idlers replace E with H.
For alter native return drop heights refer ide ntificati on system.
FLAT CARRY AND RETURN IDLER-127 DIAMETER
Code No. | A | B | Shaft Dia. | Mass R.P. | Total Mass |
XX-A1-1-K0E2-0500-YY | 594 | 750 | 27 | 6.2 | 11.5 |
XX-A1-1-K0E2-0600-YY | 694 | 850 | 27 | 7.1 | 12.8 |
XX-A1-1-K0E2-0650-YY | 744 | 900 | 27 | 7.6 | 13.5 |
XX-A1-1-K0E2-0750-YY | 844 | 1000 | 27 | 8.5 | 14.9 |
XX-A1-1-K0E2-0800-YY | 894 | 1050 | 27 | 9.0 | 15.7 |
XX-A1-1-K0E2-0900-YY | 994 | 1150 | 27 | 9.9 | 17.0 |
XX-A1-1-K0E2-1000-YY | 1094 | 1250 | 27 | 10.8 | 18.3 |
XX-A1-1-K0E2-1050-YY | 1144 | 1300 | 30 | 11.3 | 20.3 |
XX-A1-1-K0E2-1200-YY | 1294 | 1450 | 30 | 12.6 | 22.4 |
XX-A1-1-K0E3-1350-YY | 1494 | 1650 | 33 | 14.5 | 27.2 |
XX-A1-1-K0E3-1400-YY | 1544 | 1700 | 33 | 15.0 | 28.0 |
XX-A1-1-K0E3-1500-YY | 1644 | 1800 | 36 | 15.9 | 31.8 |
XX-A1-1-K0E5-1600-YY | 1844 | 2000 | 36 | 17.8 | 35.3 |
XX-input for: RS or HRS.
For flat carry idlers replace E with H.
For alter native retur n drop heights refer identification system.
FLAT CARRY AND RETURN IDLER-127 DIAMETER
Code No. | A | B | Shaft Dia. | Mass R.P. | Total Mass |
XX-A1-1-K0E2-1000-YY | 1096 | 1250 | 33 | 11.3 | 21.3 |
XX-A1-1-K0E2-1050-YY | 1146 | 1300 | 33 | 11.8 | 22.3 |
XX-A1-1-K0E2-1200-YY | 1296 | 1450 | 33 | 13.2 | 24.7 |
XX-A1-1-K0E3-1350-YY | 1496 | 1650 | 36 | 15.0 | 29.8 |
XX-A1-1-K0E3-1400-YY | 1546 | 1700 | 36 | 15.4 | 30.6 |
XX-A1-1-K0E3-1500-YY | 1646 | 1800 | 36 | 16.5 | 32.5 |
XX-A1-1-K0E5-1600-YY | 1848 | 2000 | 38 | 18.5 | 37.8 |
XX-A1-1-K0E5-1800-YY | 2046 | 2200 | 40 | 20.5 | 45.8 |
XX-input for: RS or HRS.
For flat carry idlers replace E with H.
For alter native retur n drop heights refer identification system.
GCS reserves the right to change dimensions and critical data at any time without any notice. Customers must ensure that they receive certified drawings from GCS prior to finalizing design details.
Tell Us Your Requirement About Trough Idler .Contact us Now!
Related product
Conveying Rollers Of Trough Rubber Idlers And Bracket
Return Idler Bracket for Conveyor Accessories
Steel Garland Rollers 6roll by GCS
Product detail pictures:


Related Product Guide:
Gaining client pleasure is our company's aim without end. We are going to make excellent efforts to create new and top-quality goods, meet your special requirements and provide you with pre-sale, on-sale and after-sale companies for factory customized Chain Driven Conveyor Rollers - Roller For DIA(mm) 102|114|117 Flat Return Idlers | GCS – GCS , The product will supply to all over the world, such as: Monaco, St. Petersburg, Australia, Based on our guiding principle of quality is the key to development, we continually strive to exceed our customers' expectations. As such, we sincerely invite all interested companies to contact us for future cooperation, We welcome old and new customers to hold hands together for exploring and developing; For more information, be sure to feel free to contact us. Thanks. Advanced equipment, strict quality control, customer-orientation service, initiative summary and improvement of defects and extensive industry experience enable us to guarantee more customer satisfaction and reputation which, in return, brings us more orders and benefits. If you are interested in any of our merchandise, make sure you feel free to contact us. Inquiry or visit to our company are warmly welcome. We sincerely hope to start a win-win and friendly partnership with you. You can see more details in our website.

Products and services are very good, our leader is very satisfied with this procurement, it is better than we expected,
