Chinese wholesale Conveyor Belt Alignment Rollers - GCS conveyor roller factory Impact Roller Set with bracket – GCS
Chinese wholesale Conveyor Belt Alignment Rollers - GCS conveyor roller factory Impact Roller Set with bracket – GCS Detail:
The roller set with anti-sticking rubber roller and roller frame is used in heavy bulk conveyors|GCS
lmpact rollers are used and positioned corresponding to the load points, where the lumps and the weight of material fling onto the belt could in fact cause damage to it. To limit the impact effect of the material onto the rollers, the atter is covered with a series of rubber rings of adequate thickness and resistance.
Material Iron
Application Chemical Industry| Grain Transportation|Mining Transport|
Power Plant|Structure
Ordinary Roller|Bearing Type|Double Sealed Bearing
Type: Impact Idler
Product Name: Impact Idler Roller
Usage: Conveyor Belt System
Diameter:50-219 mm
Surface Preparation: Spray Paint
Color: Requirements
Certification: ISO 9001:2015
Trademark: GCS
HS Code:8431390000
Trough Eccentric Idler – SERIES LS/RS
3 ROLL TROUGH IDLERS-127 DIAMETER
Code No. | A | B | 20° | 30° | 35° | 45° | Base Angle Size | Shaft Dia. | Trough Mass | Total | Shaft Dia. | Impact Mass R.P. | Total Mass | ||||
C | D | C | D | C | D | C | D | R.P. | Mass | ||||||||
XX-A1-3-C2A2-0750-YY | 278 | 1000 | 105 | 860 | 145 | 828 | 165 | 794 | 196 | 710 | 75 | 27 | 11.0 | 29.1 | 27 | 13.5 | 34.6 |
XX-A1-3-C2A2-0800-YY | 294 | 1050 | 105 | 914 | 160 | 870 | 180 | 830 | 208 | 752 | 75 | 27 | 11.7 | 30.1 | 27 | 14.1 | 36.0 |
XX-A1-3-C2A2-0900-YY | 331 | 1150 | 118 | 1020 | 177 | 972 | 198 | 934 | 238 | 834 | 75 | 27 | 12.5 | 32.1 | 27 | 15.3 | 38.7 |
XX-A1-3-C2A2-1000-YY | 358 | 1250 | 128 | 1096 | 190 | 1048 | 217 | 1000 | 259 | 898 | 75 | 27 | 13.3 | 34.1 | 27 | 16.5 | 41.5 |
XX-A1-3-C2A2-1050-YY | 383 | 1300 | 143 | 1166 | 206 | 1114 | 228 | 1070 | 273 | 962 | 75 | 27 | 14.0 | 35.6 | 27 | 17.6 | 43.6 |
XX-A1-3-C2A2-1200-YY | 436 | 1450 | 158 | 1318 | 226 | 1262 | 262 | 1240 | 314 | 1084 | 75 | 27 | 15.5 | 39.3 | 27 | 20.0 | 48.9 |
XX-A1-3-D2A3-1350-YY | 488 | 1650 | 178 | 1466 | 257 | 1402 | 285 | 1350 | 349 | 1212 | 90 | 30 | 17.1 | 46.6 | 30 | 22.3 | 58.2 |
XX-A1-3-D2A3-1400-YY | 494 | 1700 | 178 | 1488 | 257 | 1424 | 297 | 1354 | 349 | 1240 | 90 | 30 | 17.2 | 47.5 | 30 | 22.6 | 59.2 |
XX-A1-3-E2A3-1500-YY | 541 | 1800 | 193 | 1622 | 289 | 1540 | 318 | 1486 | 392 | 1328 | 100 | 30 | 18.6 | 57.4 | 30 | 24.7 | 71.6 |
XX-A1-3-E2A5-1600-YY | 561 | 2000 | 193 | 1684 | 289 | 1602 | 336 | 1530 | 392 | 1406 | 100 | 33 | 19.2 | 62.5 | 33 | 25.6 | 77.6 |
Note: XX-inputfor: RS or HRS.
YY-Inputforangle: 20° ,30° ,35° ,45°
Base angle size nominated is normal stock standard. Dimensions E and F do not vary with change in base angle size as tabulated below.
Code numbers shown are for plain trough idlers, for impact idlers change both” A’s” in code numbers to ” B’s
SERIES RS/HRS 3 ROLL TROUGH IDLERS-127 DIAMETER
Code No. | A | B | 20° | 30° | 35° | 45° | Base Angle Size | Shaft Total | Trough Mass | Total | Shaft Dia. | Impact Mass R.P. | Total Mass | ||||
C | D | C | D | C | D | C | D | Dia. | R.P. | Mass | |||||||
XX-A1-3-C2A2-1000-YY | 359 | 1250 | 128 | 1096 | 190 | 1048 | 217 | 1000 | 259 | 898 | 75 | 27 | 15.0 | 36.2 | 27 | 16.5 | 41.9 |
XX-A1-3-C2A2-1050-YY | 384 | 1300 | 143 | 1166 | 206 | 1114 | 228 | 1070 | 273 | 962 | 75 | 27 | 15.8 | 37.6 | 27 | 17.6 | 43.8 |
XX-A1-3-D2A2-1200-YY | 437 | 1450 | 158 | 1318 | 226 | 1262 | 262 | 1240 | 314 | 1084 | 90 | 27 | 17.3 | 43.3 | 27 | 20.0 | 51.6 |
XX-A1-3-D2A3-1350-YY | 489 | 1650 | 178 | 1466 | 257 | 1402 | 285 | 1350 | 349 | 1212 | 90 | 30 | 18.8 | 48.7 | 30 | 22.3 | 58.6 |
XX-A1-3-D2A3-1400-YY | 496 | 1700 | 178 | 1488 | 257 | 1424 | 297 | 1354 | 349 | 1240 | 90 | 30 | 19.0 | 49.5 | 30 | 22.6 | 59.7 |
XX-A1-3-E2A3-1500-YY | 542 | 1800 | 193 | 1622 | 289 | 1540 | 318 | 1486 | 392 | 1328 | 100 | 30 | 20.4 | 59.4 | 30 | 24.7 | 71.8 |
XX-A1-3-F2A5-1600-YY | 562 | 2000 | 193 | 1684 | 289 | 1602 | 336 | 1530 | 392 | 1406 | 125 | 33 | 21.0 | 71.5 | 33 | 25.6 | 87.4 |
XX-A1-3-F2A5-1800-YY | 626 | 2200 | 223 | 1860 | 325 | 1770 | 371 | 1700 | 439 | 1560 | 125 | 33 | 22.8 | 78.1 | 33 | 28.5 | 96.5 |
Note: XX-inputfor: RS or HRS.
YY-Input for angle: 20°, 30° ,35° ,45°
Base angle size nominated is normal stock standard.Dimensions E and F do not vary with change in base angle size as tabulated below.
Code numbers shown are for plain trough idlers,for impact idlers change both” A’sn in code numbers to ” B*s
Base Angle | E | F |
75X75X6 | 165 | 222 |
90X90X7 | 180 | 232 |
100X100X8 | 200 | 240 |
125X125X8 | 240 | 260 |
140X140X12 | 280 | 279 |
We are partners of our customers from first contact to after-sales service. As a technical consultant, we discuss the requirements with our customers and develop solutions that increase the efficiency and added-value. Along the entire – ISO 9001 certified process chain – we offer the most attractive solution package.
GCS reserves the right to change dimensions and critical data at any time without any notice. Customers must ensure that they receive certified drawings from GCS prior to finalizing design details.
Tell Us Your Requirement About Trough Idler .Contact us Now!
Related product
Rubber Disc Return Idler
Bearing Rollers Suppliers Of the V Return Idler
Conveyor System Cone self-aligning roller
Related article
GCS belt conveyor types and application principle
Roller Conveyor Manufacturing and Supply by (GCS)Global Conveyor Supplies
Product catalog
GLOBAL CONVEYOR SUPPLIES COMPANY LIMITED (GCS)
GCS reserves the right to change dimensions and critical data at any time without any notice. Customers must ensure that they receive certified drawings from GCS prior to finalizing design details.
Tell Us Your Requirement About Conveyor Roller .Contact us Now!
Product detail pictures:

Related Product Guide:
We know that we only thrive if we can guarantee our combined price competiveness and quality advantageous at the same time for Chinese wholesale Conveyor Belt Alignment Rollers - GCS conveyor roller factory Impact Roller Set with bracket – GCS , The product will supply to all over the world, such as: Sacramento, Bolivia, Bangalore, As operation principle is "be market-oriented , good faith as principle, win-win as objective", holding on "customer first, quality assurance, service first" as our purpose, dedicated to provide the original quality, create excellence service , we won the praise and trust in the industry of auto parts. In the future, We will provide quality product and excellent service in return to our customers , welcome any suggestions and feedback from all over the world.

The factory technical staff gave us a lot of good advice in the cooperation process, this is very good, we are very grateful.
