Best-Selling Troughing Conveyor Rollers - Trough type 45|35 degree steel roller and roller frame | GCS – GCS
Best-Selling Troughing Conveyor Rollers - Trough type 45|35 degree steel roller and roller frame | GCS – GCS Detail:
Trough Idler Set
The trough idler set has physical and chemical properties which are high wear resistance, low friction coefficient, not easy to wear the leather strap. It also has fine self-lubrication and is not easy to card to die in bad conditions, antistatic, flame retardant, aging resistance, corrosion resistance. It can withstand repeated impact, vibration, mechanical performance is excellent, light weight, easy installation, no maintenance, low noise(3-7 DB), smooth operation. The temperature of using keep in -40°C to -85°C.
The idler rollers is widely used in the original dock transporting places where dust is bigger and the environment has high corrosive, such as mining
Trough Eccentric Idler – SERIES LS/RS
3 Roll Trough Idlers-offset-102 Diameter
| Code No. | A | B | 20° | 30° | 35° | 45° | E | F | Base Angle Size | Shaft Dia. | Mass R.P. | Total Mass | ||||
| C | D | C | D | C | D | C | D | |||||||||
| XX-A1-3-A1A2-0350-YY | 134 | 600 | 220 | 429 | 239 | 392 | 248 | 369 | 269 | 338 | 56 | 171 | 50 | 27 | 5.3 | 13.6 |
| XX-A1-3-A1A2-0400-YY | 152 | 650 | 226 | 477 | 248 | 443 | 256 | 418 | 281 | 380 | 56 | 171 | 50 | 27 | 5.7 | 14.4 |
| XX-A1-3-A1A2-0450-YY | 170 | 700 | 232 | 531 | 257 | 490 | 266 | 468 | 294 | 424 | 56 | 171 | 50 | 27 | 6.1 | 15.3 |
| XX-A1-3-A1A2-0500-YY | 187 | 750 | 238 | 577 | 266 | 537 | 275 | 515 | 307 | 462 | 56 | 171 | 50 | 27 | 6.4 | 16.3 |
| XX-A1-3-A1A2-0600-YY | 222 | 850 | 251 | 681 | 283 | 632 | 298 | 604 | 331 | 546 | 56 | 171 | 50 | 27 | 7.2 | 18.1 |
| XX-A1-3-A1A2-0650-YY | 242 | 900 | 259 | 741 | 295 | 691 | 311 | 657 | 345 | 602 | 56 | 171 | 50 | 27 | 7.7 | 19.1 |
| XX-A1-3-B1A2-0750-YY | 276 | 1000 | 271 | 837 | 309 | 781 | 327 | 750 | 369 | 678 | 56 | 171 | 63 | 27 | 8.4 | 21.9 |
| XX-A1-3-B1A2-0800-YY | 292 | 1050 | 274 | 883 | 320 | 821 | 339 | 789 | 380 | 718 | 56 | 171 | 63 | 27 | 8.8 | 22.9 |
| XX-A1-3-B1A2-0900-YY | 329 | 1150 | 286 | 989 | 338 | 926 | 363 | 884 | 406 | 808 | 56 | 171 | 63 | 27 | 9.6 | 24.9 |
| XX-A1-3-C1A2-1000-YY | 356 | 1250 | 297 | 1067 | 349 | 1002 | 373 | 963 | 427 | 874 | 56 | 171 | 75 | 27 | 10.2 | 29.7 |
| XX-A1-3-C1A2-1050-YY | 381 | 1300 | 307 | 1137 | 366 | 1066 | 391 | 1025 | 445 | 932 | 56 | 171 | 75 | 27 | 10.7 | 31.1 |
| XX-A1-3-C1A2-1200-YY | 434 | 1450 | 323 | 1295 | 389 | 1212 | 419 | 1166 | 482 | 1058 | 56 | 171 | 75 | 27 | 11.9 | 34.3 |
Note: XX-input for :LS or RS.
YY-Input for angle:20°,30°,35°,45°
Base angle size nominated is normal stock standard. Dimensions F does not vary with change in base angle size.
3 Roll Trough Idlers-offset-114 Diameter
| Code No. | A | B | 20° | 30° | 35° | 45° | E | F | Base Angle Size | Shaft Dia. | Mass R.P. | Total Mass | ||||
| C | D | C | D | C | D | C | D | |||||||||
| XX-A1-3-B1A2-0500-YY | 188 | 750 | 244 | 574 | 272 | 531 | 281 | 508 | 312 | 454 | 56 | 178 | 63 | 27 | 7.2 | 17.8 |
| XX-A1-3-B1A2-0600-YY | 223 | 850 | 257 | 678 | 289 | 626 | 304 | 597 | 336 | 538 | 56 | 178 | 63 | 27 | 8.1 | 19.8 |
| XX-A1-3-B1A2-0650-YY | 243 | 900 | 264 | 738 | 301 | 685 | 317 | 650 | 350 | 594 | 56 | 178 | 63 | 27 | 8.6 | 21.0 |
| XX-A1-3-B1A2-0750-YY | 277 | 1000 | 276 | 834 | 315 | 775 | 333 | 743 | 374 | 670 | 56 | 178 | 63 | 27 | 9.4 | 22.9 |
| XX-A1-3-B1A2-0800-YY | 293 | 1050 | 280 | 880 | 326 | 815 | 345 | 782 | 385 | 710 | 56 | 178 | 63 | 27 | 9.8 | 23.9 |
| XX-A1-3-C1A2-0900-YY | 330 | 1150 | 292 | 986 | 344 | 920 | 369 | 877 | 411 | 800 | 56 | 178 | 75 | 27 | 10.7 | 29.0 |
| XX-A1-3-C1A2-1000-YY | 357 | 1250 | 303 | 1064 | 355 | 996 | 379 | 956 | 432 | 866 | 56 | 178 | 75 | 27 | 11.4 | 31.0 |
| XX-A1-3-C1A2-1050-YY | 382 | 1300 | 313 | 1134 | 372 | 1060 | 397 | 1018 | 450 | 924 | 56 | 178 | 75 | 27 | 12.0 | 32.4 |
| XX-A1-3-C1A2-1200-YY | 435 | 1450 | 329 | 1292 | 395 | 1206 | 425 | 1159 | 487 | 1050 | 56 | 178 | 75 | 27 | 13.3 | 35.7 |
Note:XX-inputfor: LS or RS.
YY-Input for angle： 20°, 30° , 35° ,45°
Base angle size nominated is normal stock standard.Dimensions F does not vary with change in base angle size.
文章推荐
GCS conveyor roller chain manufacturers reserves the right to change dimensions and critical data at any time without any notice. Customers must ensure that they receive certified drawings from GCS prior to finalizing design details.
Tell Us Your Requirement About Trough Idler .Contact us Now!
Related product
Rubber Disc Vee Return Idler by GCS Suppliers
Rubber Disc Return Idlers
Product detail pictures:
Related Product Guide:
High quality Very first,and Consumer Supreme is our guideline to offer the most beneficial service to our consumers.At present, we're attempting our greatest to be among the top exporters in our area to fulfill buyers far more need to have for Best-Selling Troughing Conveyor Rollers - Trough type 45|35 degree steel roller and roller frame | GCS – GCS , The product will supply to all over the world, such as: azerbaijan, Malawi, Ottawa, With the superior and exceptional service, we've been well developed along with our customers. Expertise and know-how ensure that we are always enjoying the trust from our customers in our business activities. "Quality", "honesty" and "service" is our principle. Our loyalty and commitments remain respectfully at your service. Contact Us Today For further information, contact us now.
By Kristin from Lesotho - 2017.12.09 14:01
The factory has advanced equipment, experienced staffs and good management level, so product quality had assurance, this cooperation is very relaxed and happy!
By Bess from Victoria - 2018.06.30 17:29
